TC8000 Touch Computer
A revolutionary design delivers revolutionary productivity gains…one more hour, per worker, per shift.
Businesses looking for the next innovation in warehouse mobility to boost warehouse productivity, have just found it: the rugged TC8000. What makes the TC8000 so special? Everything
Superior ergonomics for superior productivity and worker comfort
The new scan angle eliminates the constant tilting that traditional designs required to view the screen, increasing productivity by 14%* by reducing wrist motion by 55% and muscle effort by 15%.
* Results are dependent upon use case and scan frequency.
Enterprise-class Android KitKat
Mobility Extensions (Mx) transforms Android™ to an enterprise-class OS, providing enterprise-class security, device management and data capture capabilities.
Rugged and ready for the warehouse
The super-rugged design is built for the challenging warehouse environment. With Zebra’s most extreme impact ratings, the TC8000 operates reliably, even after 2,000 consecutive hits when tumbling and multiple 8 ft./2.4 m drops to concrete. The TC8000 is sealed, ready to handle jetting water and dust. The TC8000 is built to handle constant temperature swings between extreme heat and cold—ideal in outside yards.
An industry first: hands-free proximity scanning with a handheld device
The device can be automatically triggered by the proximity sensor, whether the TC8000 is worn in the hip holster, on the shoulder strap, in the cart mount or desktop mount. Two modes are available: near, for close-up scanning from near contact to 6 in./15 cm; and far, from contact to 1.96 ft./60 cm.
Advanced bar code scanning options
Zebra’s SE4750 imager with proprietary PRZM Intelligent Imaging technology offers unparalleled performance on just about any type of data imaginable—from 1D and 2D bar codes to fully searchable and editable documents. The SE965 engine provides best-in-class 1D scanning performance with patented Adaptive Scanning technology that delivers the widest working range in its class. All options capture bar codes in practically any condition.
Transform “green screens” to elegant all-touch screens with no host modification or coding
All-touch Terminal Emulation gives the front end of Terminal Emulation apps a smart and intuitive touch interface, automatically—and legacy TE green screens are always available to workers at the press of button.
Adobe Reader is required to open and view PDF files. This can be downloaded free from adobe.com.
Available Documents
TC 8000Markoprint NonStop Printing
To enable continuous marking in ongoing production, our Markoprint NonStopPrinting printhead holds two alternately printing cartridges. Because the other ink cartridge is printing on the same position, each ink cartridge can be changed, cleaned, or serviced without pausing the machine.
An intelligent automatism prevents both cartridges from going empty at the same time. The first cartridge will always print two consecutive print jobs, taking turns with the second cartridge, which will only print one. This sophisticated automatism avoids both cartridges from running out at the same time. This will keep the ink from drying out in both cartridges. When the cartridge with the larger print volumes is empty, a warning will show, and the other cartridge will continue printing until it is replaced. The new cartridge will print the lower quantities to allow for you to replace the “older” cartridge. A sophisticated workflow that will boost your efficiency and productivity.
View ProductGeset 111 Top Labelling System
The Geset 111 labelling system is used to label square products on the top side automatically. Depending on the type and dimension of the product, different label sizes are used. The products are fed manually or by a conveying system provided by the customer at an infeed passage on the labelling system. Care should be taken on accurate alignment of the products. It is essential that the products are forwarded separately to the applicator with a gap between each other.
When the barrier is reached, an application trigger is tripped. The label applicator applies a label on the product in Wipe On procedure. The label on the top side is pushed on to the product by a brush or roller. After labelling, the products move on and can be removed from the conveyor by the customer.
View ProductMarkoprint Integra One ip LX
Unleash the Power of Proven Washdown Technology (IP Protection) for Seamless Performance in Complex and Demanding Applications. Experience High-Speed Printing and Effortless Operation with Up to 10 mm Print Distance. Discover Impressive Innovations, including a Patented Mechanism for Secure Ink/Printhead Unit Hold, Setting a New Standard in Printing Excellence.
View ProductEASYMARK – Standard Wax
EASYMARK is the standard Weber wax ribbon which delivers consistent print
quality on any kind of paper label materials. It prints high density legible
barcodes and traceability data for short life labeling needs.
