Weber LA 4050 P
Two-sided pallet labelling The Weber LA 4050 P pallet labeller allows the labelling on two adjacent sides. Up to 7 pallets can be labelled per minute, depending on the application. Variable data (e.g. text, barcode or logo) are printed precisely and legibly on the labels immediately before the application procedure. The labels are subsequently applied […]
Two-sided pallet labelling
The Weber LA 4050 P pallet labeller allows the labelling on two adjacent sides. Up to 7 pallets can be labelled per minute, depending on the application. Variable data (e.g. text, barcode or logo) are printed precisely and legibly on the labels immediately before the application procedure. The labels are subsequently applied using swing-arm technology with diagonal bar. This patented process is very safe: the pallet rolls back out in the event of a power failure, for example. If, in doing so, it should come into contact with the extended applicator arm, the bar automatically pushes the arm out of the way.
Flexible
Products of varying dimensions can be labelled due to the large swing-arm radius of 400 mm. Thanks to the Tamp-Blow, LA 4050 P can also flexibly label boxes, crates and other types of packaging, including convex or concave-shaped product surfaces. Labeling is possible in any conceivable installation position due to the symmetrical design. The compact dimensions of 1000 x 800 x 1200 mm (L x W x H) allow easy integration into existing production environments.
Ease of servicing
LA 4050 P has a built-in service interval counter which informs the user in good time of the next service date. Easy, fast replacement of individual components, due to wear for example, is also a practical feature due to the modular construction. The print module, for example, can be replaced with only 5 screws and 2 cables.
Application capacity
Up to 7 pallets per minute without stopping product, the application capacity is dependent on conveying speed, text change and stroke
Max. conveying speed on front labelling
18 m/min
Max. conveying speed on rear labelling
15 m/min
Choice of options:
RFID labeling
Test scanner
System base
IPC in protective housing
Legitronic® label printing and design software
Adobe Reader is required to open and view PDF files. This can be downloaded free from adobe.com.
Available Documents
Legi-Air 4050P leaflet printerGeset 112 Bottom Labelling System
The Geset 112 labelling system is used to label square products on the bottom side automatically. Depending on the type and dimension of the product, different label sizes are used. The products are fed manually or by a conveying system provided by the customer at an infeed passage on the labelling system. Care should be taken on accurate alignment of the products. It is essential that the products are forwarded separately to the applicator with a gap between each other.
When the light barrier is reached, an application trigger is tripped. The label applicator applies then in Wipe On procedure a label onto the product. The label on bottom side is pushed on the product by the self-weight of the product. After labelling the products move on and can be removed from conveyor by the customer.
View ProductMarkoprint Integra Ultimate
The innovative Integra Ultimate thermal inkjet printer not only provides IP65 protection against dust and moisture, but it also closes and cleans the nozzle plate at each pause. This system ensures that the printing is always clean, with faultless results even after extended breaks. As a result, the ink cartridges’ open times are multiplied many times. Two HP Class thermal inkjet ink cartridges can be used with the print head. As a result, the system produces beautiful prints with a maximum height of 25 mm.
View ProductMarkoprint Integra Vivid
Unleash the Power of Modern Touch Operating Technology and an Innovative Swipe User Interface. Say Goodbye to Complicated Print Jobs and Say Hello to Effortless Operation of X1JET and PP Class Printing Systems. With the Freedom to Position the 7” High-Resolution HMI Color Display Anywhere You Choose, Prepare to Be Awed by the Ultimate Printing Flexibility and Innovation. Upgrade to integra Vivid Today and Embrace a New Era of Printing Excellence.
View ProductMarkoprint Integra One
Labeling systems are not always easy to integrate into preexisting production lines. The Markoprint Integra One can be easily integrated into production processes thanks to its compact dimensions of 186 x 86 x 98 mm. The printing system has a display for data entry as well as system settings modification and verification. This information can also be viewed from mobile devices if the WLAN version is selected.
Inkjet printers should be properly protected if they are subjected to harsh manufacturing circumstances. In addition, the Markoprint integra One ip has an IP 65 protection rating. As a result, it’s ideal for use in the food industry.
View Product
