Hand-Held Label Applicators
These light-weight Towa brand label applicators are the fast, easy way to manually apply pressure-sensitive labels, including RFID tags, to your products. They are available in a variety of sizes from 20mm to 100mm in width.
If you need to apply labels to small batches of products or cartons, these Towa hand-held label applicators can help speed up production and accuracy. Just squeeze the lever and labels are advanced for application. Fast and easy labelling!
Hand-Held Label Applicators
Weber’s line of manual label applicators provides an easy, productive means of hand-held labelling. Available in two models and three separate sizes to address various label shapes and widths, the units can be used to apply pressure-sensitive labels from 20mm to 100mm in width.
And for pre-encoded RFID tags, the units have been specially designed to apply the tags without damaging the RFID inlays.
These handy applicators employ an exclusive label edge detector that automatically senses the leading edge of the label to ensure accurate dispensing. In addition, all three applicators can dispense any type of label or RFID tag without the use of a special liner tool, cartridge or cassette.
Unlike other manual methods of label application, our units include these unique features:
- Simple side loading minimizes label threading time
- Exclusive edge detector eliminates the need for liner slits or perforations
- Positive feed roller provides accurate dispensing
The APN Series of label applicators handles labels from 0.78″ to 3.93″ wide and is perfect for most pre-printed roll labels.
The APF Series of label applicators supports the same sizes as the APN Series but also includes a slidable Mech-Sensor that allows the application of round and other non-rectangular labels.
Adobe Reader is required to open and view PDF files. This can be downloaded free from adobe.com.
Available Documents
hand-held_applicatorMarkoprint Integra Quadro/Quadro²
The new Markoprint Integra Quadro/Quadro² print controller can control up to four inkjet printers or four print positions at the same time. This allows you to print on both sides of primary and secondary packaging on one or two separate production lines. There are also two separate printing methods that can be used in this process.
The Markoprint Integra Quadro/Quadro² can easily cope with limited space thanks to its slender design. Installation inside or directly at the industrial line is straightforward thanks to the different fixation options. It was designed specifically for installation in control panels and machinery.
View ProductMarkoprint Shutter Printhead HP
Inkjet nozzles can clog and dry up in a dusty printing environment, which is typical in wood-processing enterprises and other sectors. This results in poorly printed images. Our Markoprint Shutter Printhead HP prevents dust from entering the ink cartridge or gathering on the nozzles. During a production halt, the printhead automatically retracts the cartridge and shuts the open nozzle plate. After being paused for even several days, it is instantly ready to print again.
View ProductGeset 111 Top Labelling System
The Geset 111 labelling system is used to label square products on the top side automatically. Depending on the type and dimension of the product, different label sizes are used. The products are fed manually or by a conveying system provided by the customer at an infeed passage on the labelling system. Care should be taken on accurate alignment of the products. It is essential that the products are forwarded separately to the applicator with a gap between each other.
When the barrier is reached, an application trigger is tripped. The label applicator applies a label on the product in Wipe On procedure. The label on the top side is pushed on to the product by a brush or roller. After labelling, the products move on and can be removed from the conveyor by the customer.
View ProductMarkoprint Integra PP RAZR
Experience Effortless High-Resolution Printing: Introducing the Integra PP RAZR with Cutting-Edge Technology. Print Up to 34mm High on Virtually Any Product Surface with Ease. Be Amazed by the Permanent Print Head’s Impressive Resolution, Lightning-Fast Speed, and Integrated Redundancy. Plus, its Compact Design Ensures Seamless Placement in Any Production Facility.
View Product
