RF-Lite

Low-cost offline coding system; ideal for companies looking to automate their date marking process for the first time.

The RF-Lite is a simple, low-cost offline coding system; ideal for companies looking to automate their date marking process for the first time. It also suits larger operators who are looking to install dedicated marking systems on multiple production lines.

imageb

 

RIGHT CODE
Fitted with clean, thermal inkjet technology, the RF-Lite is ideal for printing
clear, concise date and batch codes onto sleeves and cartons.

RIGHT PLACE
The RF-Lite can consistently print codes onto all shapes and sizes of sleeve ranging
from 30 x 70mm to 300 x 200mm. It only takes a few seconds to swap between sizes.

RIGHT COST
With its comparatively low upfront cost, the RF-Lite is an ideal entry-level solution for companies wanting to automate their
offline date coding.

“This compact unithas dramatically reduced
the time taken to codeour cartons.”

OTHER BENEFITS
• It’s easy to set up and adjust; no training needed.
• The RF-Lite’s tiny 500 x 500mm footprint means that it can be easily squeezed into tight spaces
• We offer a money-back guarantee if the system does not meet the customers needs and expectations*
• Under our one-year warranty we can replace a broken down RF-Lite unit within 24 hours*

Adobe Reader is required to open and view PDF files. This can be downloaded free from adobe.com.

Available Documents

Rf-Lite

    Markoprint NonStop Printing

    To enable continuous marking in ongoing production, our Markoprint NonStopPrinting printhead holds two alternately printing cartridges. Because the other ink cartridge is printing on the same position, each ink cartridge can be changed, cleaned, or serviced without pausing the machine.

    An intelligent automatism prevents both cartridges from going empty at the same time. The first cartridge will always print two consecutive print jobs, taking turns with the second cartridge, which will only print one. This sophisticated automatism avoids both cartridges from running out at the same time. This will keep the ink from drying out in both cartridges. When the cartridge with the larger print volumes is empty, a warning will show, and the other cartridge will continue printing until it is replaced. The new cartridge will print the lower quantities to allow for you to replace the “older” cartridge. A sophisticated workflow that will boost your efficiency and productivity.

    View Product

    Markoprint ZTV HP

    The Markoprint ZTV HP is a Central Ink Supply (CIS) system stores up to 400ml of ink for Markoprint HP Class inkjet printing systems such as the Markoprint integra One, Markoprint X2JET / X4JET, and Markoprint integra Quadro.

    The large ink tank prevents frequent cartridge replacements from lowering your Overall Equipment Effectiveness (OEE). It can hold up to four single HP cartridges repaying you rapidly thanks to reduced ink prices. For non-interrupted production, the system can be paired with our NonStopPrinting printhead. Using an interface directly on the cartridge, current ink filling levels are monitored in real time. When the levels in the bulk tank fall below a certain threshold, a valve to the bulk tank opens and automatically refills it.

    View Product

    Markoprint Integra One

    Labeling systems are not always easy to integrate into preexisting production lines. The Markoprint Integra One can be easily integrated into production processes thanks to its compact dimensions of 186 x 86 x 98 mm. The printing system has a display for data entry as well as system settings modification and verification. This information can also be viewed from mobile devices if the WLAN version is selected.

    Inkjet printers should be properly protected if they are subjected to harsh manufacturing circumstances. In addition, the Markoprint integra One ip has an IP 65 protection rating. As a result, it’s ideal for use in the food industry.

    View Product

    Markoprint Shutter Printhead HP

    Inkjet nozzles can clog and dry up in a dusty printing environment, which is typical in wood-processing enterprises and other sectors. This results in poorly printed images. Our Markoprint Shutter Printhead HP prevents dust from entering the ink cartridge or gathering on the nozzles. During a production halt, the printhead automatically retracts the cartridge and shuts the open nozzle plate. After being paused for even several days, it is instantly ready to print again.

    View Product

[contact-form-7 404 "Not Found"]