X4Jet Plus

With the new high performance Markoprint X4JET print controller, different inkjet printing technologies can be controlled either simultaneously or alternately. The intuitive input unit of the new high performance Markoprint X4JET plus print controller is a boost to operator convenience. All system parameters can be entered easily and quickly, to be stored and called up later.

Contact Us Download Brochure

Markoprint X4JET Plus

 

The Markoprint X4JET Plus targets not only the food & beverage industry, but also the pharmaceutical industry and system integrators to provide reliable, fast and flexible printing where its needed. Using MarkoPrint’s iDesign software, print layouts can be quickly and intuitively designed by anyone. With simultaneous 1:1 data transmission, high industry demands are satisfied. The number of conventional interfaces guarantees fast and smooth communication with higher level data systems. No batch processing or downloads necessary.

Datamatrix, MHD and batch marking can be applied to primary packaging and large barcodes, company logos and certification marks may be applied to secondary packaging. Because the Markoprint X4JET manages up to 3 000 serializations per minute, all this can be done fast. The compact control unit can also be conveniently integrated into existing conveying systems or into control cabinets.

 

Intelligent high-speed control system for demanding marking applications Three printing technologies can be controlled simultaneously.

 

        • Touch surface to operate the system easily

 

        • Parallel operation using a standard keypad and function keys

 

        • Networking possibilities using TCP/IP, USB and EIA232

 

        • Possible connection of HP, LX und MX print heads(individually or in combination)

 

        • Print available on two production lines

 

        • Simultaneous marking of primary and secondary packaging using a controller

 

        • Connection of up to 4 print heads

 

        • Stand-alone system with 2.7“ OLE display and iLogik input

 

        • Animated graphics for simple use

 

Adobe Reader is required to open and view PDF files. This can be downloaded free from adobe.com.

Available Documents

X4JET leaflet
Inkjet Coding Overview Brochure
Ink Guide 2015

    Markoprint ZTV HP

    The Markoprint ZTV HP is a Central Ink Supply (CIS) system stores up to 400ml of ink for Markoprint HP Class inkjet printing systems such as the Markoprint integra One, Markoprint X2JET / X4JET, and Markoprint integra Quadro.

    The large ink tank prevents frequent cartridge replacements from lowering your Overall Equipment Effectiveness (OEE). It can hold up to four single HP cartridges repaying you rapidly thanks to reduced ink prices. For non-interrupted production, the system can be paired with our NonStopPrinting printhead. Using an interface directly on the cartridge, current ink filling levels are monitored in real time. When the levels in the bulk tank fall below a certain threshold, a valve to the bulk tank opens and automatically refills it.

    View Product

    Markoprint Integra One

    Labeling systems are not always easy to integrate into preexisting production lines. The Markoprint Integra One can be easily integrated into production processes thanks to its compact dimensions of 186 x 86 x 98 mm. The printing system has a display for data entry as well as system settings modification and verification. This information can also be viewed from mobile devices if the WLAN version is selected.

    Inkjet printers should be properly protected if they are subjected to harsh manufacturing circumstances. In addition, the Markoprint integra One ip has an IP 65 protection rating. As a result, it’s ideal for use in the food industry.

    View Product

    Geset 112 Bottom Labelling System

    The Geset 112 labelling system is used to label square products on the bottom side automatically. Depending on the type and dimension of the product, different label sizes are used. The products are fed manually or by a conveying system provided by the customer at an infeed passage on the labelling system. Care should be taken on accurate alignment of the products. It is essential that the products are forwarded separately to the applicator with a gap between each other.

    When the light barrier is reached, an application trigger is tripped. The label applicator applies then in Wipe On procedure a label onto the product. The label on bottom side is pushed on the product by the self-weight of the product. After labelling the products move on and can be removed from conveyor by the customer.

    View Product

    Markoprint Shutter Printhead HP

    Inkjet nozzles can clog and dry up in a dusty printing environment, which is typical in wood-processing enterprises and other sectors. This results in poorly printed images. Our Markoprint Shutter Printhead HP prevents dust from entering the ink cartridge or gathering on the nozzles. During a production halt, the printhead automatically retracts the cartridge and shuts the open nozzle plate. After being paused for even several days, it is instantly ready to print again.

    View Product
Product Enquiry Form