Legi-air 6000
High performance label printing dispenser for labelling shipping cartons.
The modular concept of the Legi-air label Print apply system allows the unit to be customised to suit existing production lines.
Legi-air 6000
Product traceability, quality assurance, tracking and tracing in logistics or individual identification of products for just-in- time production – these are just some of the current industry demands that are catered for with this system. Interchangeable dispensing heads allow the use of different label sizes. Print engines by leading global manufacturers such as Zebra, Datamax, CaB etc allows an optimal match to the application and its specific printing requirements. Reaching 400 products per hour, the Legi-air 6000 high performance printing and application system will label passing cartons of varying height quickly and efficiently.
Differences in product height of up to 500 mm can be achieved thanks to the high performance stroke unit. these peak performances are achieved using a servo motor driven dispensing applicator and carbon fibre construction.
Once the sensor has initially determined the height of the approaching product for labelling, the applicator will move to the correct position at high speed. this reduces the travelling distance for labelling and the Legi-air 6000 will simultaneously label more accurately and up to 50 percent faster than a printing dispenser with a pneumatically driven cylinder.
The new redesigned microprocessor controller is optimal in terms of both cost and space. This makes the system highly compact and facilitates easy integration into existing operating environments. The Legi-air 6000 will handle large label rolls with an ergonomically adjustable reel holder taking maximum roll size of up to 350 mm diameter. This results in higher efficiency production runs and less downtime for Label Reel Change.
The intelligent construction allows easy access to system components for servicing and or maintenance, enabling convenient changing of labels and foils as well as particularly easy cleaning of the print module’s thermal print head, as needed.
Adobe Reader is required to open and view PDF files. This can be downloaded free from adobe.com.
Available Documents
Legi-Air_6000 leafletMarkoprint Integra Quadro/Quadro²
The new Markoprint Integra Quadro/Quadro² print controller can control up to four inkjet printers or four print positions at the same time. This allows you to print on both sides of primary and secondary packaging on one or two separate production lines. There are also two separate printing methods that can be used in this process.
The Markoprint Integra Quadro/Quadro² can easily cope with limited space thanks to its slender design. Installation inside or directly at the industrial line is straightforward thanks to the different fixation options. It was designed specifically for installation in control panels and machinery.
View ProductMarkoprint ZTV HP
The Markoprint ZTV HP is a Central Ink Supply (CIS) system stores up to 400ml of ink for Markoprint HP Class inkjet printing systems such as the Markoprint integra One, Markoprint X2JET / X4JET, and Markoprint integra Quadro.
The large ink tank prevents frequent cartridge replacements from lowering your Overall Equipment Effectiveness (OEE). It can hold up to four single HP cartridges repaying you rapidly thanks to reduced ink prices. For non-interrupted production, the system can be paired with our NonStopPrinting printhead. Using an interface directly on the cartridge, current ink filling levels are monitored in real time. When the levels in the bulk tank fall below a certain threshold, a valve to the bulk tank opens and automatically refills it.
View ProductMarkoprint Integra Ultimate
The innovative Integra Ultimate thermal inkjet printer not only provides IP65 protection against dust and moisture, but it also closes and cleans the nozzle plate at each pause. This system ensures that the printing is always clean, with faultless results even after extended breaks. As a result, the ink cartridges’ open times are multiplied many times. Two HP Class thermal inkjet ink cartridges can be used with the print head. As a result, the system produces beautiful prints with a maximum height of 25 mm.
View ProductGeset 117 Top and Bottom Labelling System
The Geset 117 labelling system is used to label square products on the top and bottom side automatically. Depending on the type and dimension of the product, different label sizes are used. The products are fed manually or by a conveying system provided by the customer at an infeed passage on the labelling system. Care should be taken on accurate alignment of the products. It is essential that the products are forwarded separately to the applicator with a gap between each other.
When the light barrier is reached, an application trigger is tripped. Both label applicators apply then in Wipe On procedure a label onto the product. The label on top side is pushed on the product by a brush or roller. The label on bottom side is pushed on the product by the self-weight of the product. After labelling the products move on and can be removed from conveyor by the customer.
View Product
