Field Force/T&L

Field Force Transport & Logistics
With a mobile solution from Weber your work force will spend less time writing reports and more time preforming the job they were hired for. In stead of paper they will use their mobile device to do all the reporting. Faster and with less mistakes.
Case study: Smiling Faces
Smiling Faces services office coffee machines and “food at work” vending machines. Their service crew had a web-app in their iPhones for reporting. The app stopped working when they had no 3G coverage. To work faster and more accurately they needed to scan barcodes. The app they used did not have offline management or an easy way of integrating a barcode scanner.
 
Why not build another iPhone app you may ask? To be able to handle offline management and a Bluetooth scanner they would need to build an iPhone app from scratch. The software development would become very expensive. With the rapid design concept the app they needed could be built in just a few hours. They bought new mobile devices with built in barcode readers, Datalogic Memor.

 

Adobe Reader is required to open and view PDF files. This can be downloaded free from adobe.com.

Available Documents

software-brochure

    Geset 117 Top and Bottom Labelling System

    The Geset 117 labelling system is used to label square products on the top and bottom side automatically. Depending on the type and dimension of the product, different label sizes are used. The products are fed manually or by a conveying system provided by the customer at an infeed passage on the labelling system. Care should be taken on accurate alignment of the products. It is essential that the products are forwarded separately to the applicator with a gap between each other.

    When the light barrier is reached, an application trigger is tripped. Both label applicators apply then in Wipe On procedure a label onto the product. The label on top side is pushed on the product by a brush or roller. The label on bottom side is pushed on the product by the self-weight of the product. After labelling the products move on and can be removed from conveyor by the customer.

    View Product

    Geset 111 Top Labelling System

    The Geset 111 labelling system is used to label square products on the top side automatically. Depending on the type and dimension of the product, different label sizes are used. The products are fed manually or by a conveying system provided by the customer at an infeed passage on the labelling system. Care should be taken on accurate alignment of the products. It is essential that the products are forwarded separately to the applicator with a gap between each other.

    When the barrier is reached, an application trigger is tripped. The label applicator applies a label on the product in Wipe On procedure. The label on the top side is pushed on to the product by a brush or roller. After labelling, the products move on and can be removed from the conveyor by the customer.

    View Product

    Geset 141 Semi Automatic Label Dispenser

    The Geset 141 semi-automatic all-round labelling system is used for labelling small tins, bottles, jars etc. This solution was developed especially for companies requiring flexible labelling of small batches. Classical applications include the pharmaceutical and cosmetics industry and the food and beverage sector.

     

     

     

     

    View Product

    Geset 112 Bottom Labelling System

    The Geset 112 labelling system is used to label square products on the bottom side automatically. Depending on the type and dimension of the product, different label sizes are used. The products are fed manually or by a conveying system provided by the customer at an infeed passage on the labelling system. Care should be taken on accurate alignment of the products. It is essential that the products are forwarded separately to the applicator with a gap between each other.

    When the light barrier is reached, an application trigger is tripped. The label applicator applies then in Wipe On procedure a label onto the product. The label on bottom side is pushed on the product by the self-weight of the product. After labelling the products move on and can be removed from conveyor by the customer.

    View Product

[contact-form-7 404 "Not Found"]