Bottle-Matic Label Applicators

Bottle-Matic bottle labelers enable you to label all kinds of products by simply inserting the container and depressing a foot-switch. Labels are applied at over 4.5” per second – most water bottles are labeled in less than two seconds. The operator then removes the bottle and inserts another to start the procedure again. These automated labeling systems make it easy to label wine bottles, craft beer bottles, water bottles and most other round products.

The Bottle-Matic has been developed to apply 1 or 2 labels (front & back) to a wide range of cylindrical containers including Bottles, Jars, Cans, Tubs and Tubes and is easily adapted to work with tapered, ridged & odd shaped containers.

Easy to set up and operate, making them an economical solution to relatively short runs and bespoke labelling.

The Bottle-Matic I is designed to apply 1 label to containers from a small patch to fully wrap around.

The Bottle-Matic II is an advanced model with the provision to apply 1 or 2 labels from the same roll, with a built in incremental dial to accurately space front and back labels on the same container.

Adobe Reader is required to open and view PDF files. This can be downloaded free from adobe.com.

Available Documents

Bottle-Matic EN Specification

    Weber Alpha HSM Label Applicator

    Alpha HSM

    The Alpha HSM (High Speed Modular) is our new modular design that is based on various components that can be combined into the right system to meet your requirements.

    View Product

    Hand-Held Label Applicators

    Label applicator

    These light-weight Towa brand label applicators are the fast, easy way to manually apply pressure-sensitive labels, including RFID tags, to your products. They are available in a variety of sizes from 20mm to 100mm in width. If you need to apply labels to small batches of products or cartons, these Towa hand-held label applicators can help speed up production and accuracy. Just squeeze the lever and labels are advanced for application. Fast and easy labeling!

    View Product

    Weber 114 One- or Two-Sided Labeling System

    Label Applicator Weber 114

    The brand-new Weber 114 system provides a simple, cost-effective solution to low volume labeling for applying labels to one or two sides of a straight-walled product or package. Featuring two Weber Alpha Compact applicator heads and a 7.75″-wide, 45″-long belt conveyor, the Model 114 can be added to in-place production lines or operated manually as a stand-alone applicator.

    View Product

    FasTagger II Lumber Tagging Stapler

    fastagger-applying-labels

    You probably know that meeting UPC bar code requirements can be a job in itself. Manually stapling tags onto ends of lumber is not only time-consuming, but also tiring. That’s why Weber developed the improved FasTagger II end-tagger. The FasTagger II is a labeling system specially built for lumber mills and forestry product companies that combines a heavy-duty stapler with a label dispensing apparatus that allows one-handed end tagging of finished lumber.

    View Product

[contact-form-7 404 "Not Found"]